Contents

- 1 How do you calculate horsepower from torque?
- 2 How do you calculate motor horsepower?
- 3 How do you calculate motor power from RPM?
- 4 How much torque is 1 horsepower?
- 5 Which is better hp or torque?
- 6 What is the formula for motor speed?
- 7 How is BHP calculated?
- 8 How many RPM is a 4 pole motor?
- 9 What is the formula to calculate torque?
- 10 What is the formula for calculating torque?

## How do you calculate horsepower from torque?

When you choose torque, this calculator will measure the approximate torque of an engine based on the horsepower, multiplied by 5,252 (conversion between foot-pounds and horsepower), divided by the RPM of the engine. For example, if your engine has 350 horsepower then the torque would be 367 foot-pounds, at 5,000 RPM.

## How do you calculate motor horsepower?

How can I calculate horsepower from a motor? Multiply the voltage, current and efficiency; then divide the result by 746. For example, the horsepower of a 230 volt motor pulling four amps and having 82 percent efficiency would equal one horsepower.

## How do you calculate motor power from RPM?

For an AC motor, the number of poles and the frequency determine the no-load RPM. For a 60 Hz system with four poles, the calculations to determine RPM would be:

- (Hz x 60 x 2) / number of poles = no-load RPM.
- (60 x 60 x 2) / 4.
- 7,200 / 4 = 1,800 RPM.

## How much torque is 1 horsepower?

The definition of 1 Horsepower is displacing 1 lb. 33,000 ft. in one minute or 33,000 lb-ft / minute.

## Which is better hp or torque?

Torque, simply, is the ability of a vehicle to perform work — specifically, the twisting force applied by the crankshaft. Horsepower is how rapidly the vehicle can perform that work. Because there is generally a limit on how fast you can spin an engine, having higher torque allows for greater horsepower at lower rpms.

## What is the formula for motor speed?

The mathematical formula to remember in helping make this calculation is the number of cycles (Hz) times 60 (for seconds in a minute) times two (for the positive and negative pulses in the cycle) divided by the number of poles.

## How is BHP calculated?

BHP is measured by applying a resistance torque as a brake on the Shaft. A ) BHP = (2πnT ) /33000,2πnT = Power in lb-ft per min. n =no. of revolution per minute of the engine, T = Torque applied on shaft.

## How many RPM is a 4 pole motor?

A four-pole motor will only rotate at 1,800 rpm.

## What is the formula to calculate torque?

Torque is the twisting force that tends to cause rotation. The point where the object rotates is known as the axis of rotation. Mathematically, torque can be written as T = F * r * sin(theta), and it has units of Newton-meters.

## What is the formula for calculating torque?

By definition, torque τ = r × F. Therefore, torque on a particle is equal to the first derivative of its angular momentum with respect to time.